Search
Page Copyright © 2019 DEACHO Communication Technology Co., Ltd
GREAT SERVICE IS OUR MISSION
HIGH QUALITY IS OUR OBLIGATION
Cold shrink EPDM tube, connector insulators, similar 3M 98-KC31, CXS-2
Cold shrink EPDM tube, connector insulators, similar 3M 98-KC31, CXS-2
basic information
Product Description
Cold shrink EPDM tube, connector insulators, similar 3M 98-KC31, CXS-2
Description.
• Simple installation; requires no tools,No torches or heat required.
• Accommodates a wide range of cable sizes
• Good thermal stability
• Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure
• Excellent wet electrical properties
• Tough rubber formulation withstands backfilling
• No mastic or tape required to seal
• Resists acids and alkalis; resists ozone
|
||||
Feature & Advantages.
• Simple installation; requires no tools,No torches or heat required.
• Accommodates a wide range of cable sizes
• Good thermal stability
• Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure
• Excellent wet electrical properties
• Tough rubber formulation withstands backfilling
• No mastic or tape required to seal
• Resists acids and alkalis; resists ozone
|
||||
Structure.
Inner diameter of plastic core as supplied-D2: 70 mm
Length after full shrink (nothing inside)-L: 330 mm
Length as supplied-L1: 295 ±10 mm
Application range: 32-63 mm
|
||||
Application.
Item No.: ECS70X330
Material: EPDM rubber
Include: tube x1, foam tape x 1
Application: weatherproofing for cell sites
It is used to seal 1/4" - 1 5/8" Cable to 1 1/4" - 1 5/8" Cable or 1 1/4" - 1 5/8" Cable to Antenna or Surge Arrestor, through DIN, N, 4.3-10 connector.
|
Installation instructions.
Technical Datas.
Test item
|
Test Standard
|
Unit
|
Value
|
Dielectric Strength
|
GB/T 1695-2005
|
kV/mm
|
17.16
|
Waterproof Rate
|
ISO 20653:2013
|
------
|
IP68
|
Shore Hardness
|
GB/T 531.1-2008
|
Shore A
|
44
|
Tear Strength
|
GB/T 529-2008
|
kN/m
|
28
|
Tensile strength
|
ISO 37:2011
|
Mpa
|
9.31
|
Elongation at Break
|
ISO 37:2011
|
%
|
720
|
Light Ageing-UV Eposure
|
ASTM G154-12a Cycle 1
|
1000h exposure duration with Lamp type: UVA-340 / 8h UV at(60±3)℃ BPT, 0.89W/(m2.nm)@340nm / 4h
condensation at (50±3)℃ BPT |
|
Ozone Aging
|
ISO 7326:2006 Method 1
|
Pretreatment temperature: (23±2) ℃/ Pretreatment period: 48h/ Testing temperature: (40±2)℃ /Ozong concentration: (50±5)pphm.
|
Selection Table.
* If you need other size, please feel free let us know.
On a
Silicone rubber coax and power connector cold shrink kit insulating sleeve, similar 3M 98-KC 8
The next article
EPDM cold shrink sleeves sealing for feeder cable connections, similar 3M 98-KC21and CXS-1