Search
Page Copyright © 2019 DEACHO Communication Technology Co., Ltd
GREAT SERVICE IS OUR MISSION
HIGH QUALITY IS OUR OBLIGATION
Cold shrink connector sealing kit for 1/2 jumper to device connector, weatherproofing solution for cell site, similar 3M 98-KC11
Cold shrink connector sealing kit for 1/2 jumper to device connector, weatherproofing solution for cell site, similar 3M 98-KC11
basic information
Product Description
Cold shrink connector sealing kit for 1/2 jumper to device connector, weatherproofing solution for cell site, similar 3M 98-KC11
Description.
SCS series is silicone cold shrink tubes, provide a quick and easy method for protecting and sealing for an inline connection, terminal lug, etc., cold shrink tubing is an open-ended tubular rubber sleeve , pre-expanded on a removable core for easy installation.Silicone cold shrink tube are made from silicone rubber which does not contain chlorides or sulfur.
The core is removed after the tube has been positioned for installation, allowing the tube to shrink and form a water-resistant seal. In applications where the different cable diameter cannot be covered with the tube range, a
foam tape is included in the package. The foam tape is used to increase the smallest cable diameter and assure the sealing of the clod shrink tube.
|
||||
Feature & Advantages.
• Simple installation; requires no tools, no torches or heat required.
• Accommodates a wide range of cable sizes
• Good thermal stability
• Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure
• Excellent wet electrical properties
• No mastic or tape required to seal
• Resists acids and alkalis; resists ozone
• UV resistant, Ozone-resistant, RoHS compliant
|
||||
Structure.
Inner diameter of plastic core as supplied: 45 mm
Length after full shrink (nothing inside)-L: 203 mm
Length as supplied-L1: 165±10 mm
Application range: 13.5-39 mm
|
||||
Application.
Item No.: SCS45X203
Material: Solid silicone rubber
Application: weatherproofing for cell sites
It is used to seal 1/2" jumper cable to device, through DIN, N, 4.3-10 connector.
|
Installation instructions.
Technical Datas.
Test item
|
Test Standard
|
Unit
|
Value
|
Dielectric Strength
|
ASTM D149-75 @1.75
|
KV/mm
|
21
|
Volume Resistivity
|
ASTM D257
|
Ohm.cm
|
3.4×10^15
|
Waterproof Rate
|
ISO 20653:2013
|
------
|
IP68
|
Shore Hardness
|
GB/T 531.1-2008
|
Shore A
|
44
|
Tear Strength
|
ASTM D624C-73
|
KN/m
|
35
|
Tensile strength
|
ASTM D412-75
|
Mpa
|
10.8
|
Elongation at Break
|
ASTM D412-75
|
%
|
750
|
Bacteria resistance
|
ASTM G21 / expose 28 days
|
----
|
No bacteria
|
Ozone-Resistance
|
ASTM D1149-07
|
----
|
PASS
|
UV-Resistance
|
ASTM G154-06
|
----
|
PASS
|
Flame-Retardance
|
UL 94
|
----
|
HB
|
Working temperature
|
|
℃
|
-60 to 200
|
Selection Table.
* If you need other size, please feel free let us know.
On a
EPDM cold shrink sleeves sealing for feeder cable connections, similar 3M 98-KC21and CXS-1