Search
Page Copyright © 2019 DEACHO Communication Technology Co., Ltd
GREAT SERVICE IS OUR MISSION
HIGH QUALITY IS OUR OBLIGATION
EPDM cold shrink tubing for waterproof and insulation
EPDM cold shrink tubing for waterproof and insulation
basic information
Product Description
EPDM cold shrink tubing for waterproof and insulation
Description.
SCS series is silicone cold shrink tubes, provide a quick and easy method for protecting and sealing for an inline connection, terminal lug, etc., cold shrink tubing is an open-ended tubular rubber sleeve , pre-expanded on a removable core for easy installation.Silicone cold shrink tube are made from silicone rubber which does not contain chlorides or sulfur.
The core is removed after the tube has been positioned for installation, allowing the tube to shrink and form a water-resistant seal. In applications where the different cable diameter cannot be covered with the tube range, a
foam tape is included in the package. The foam tape is used to increase the smallest cable diameter and assure the sealing of the clod shrink tube.
|
||||
Feature & Advantages.
• Simple installation; requires no tools, no torches or heat required.
• Accommodates a wide range of cable sizes
• Good thermal stability
• Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure
• Excellent wet electrical properties
• No mastic or tape required to seal
• Resists acids and alkalis; resists ozone
• UV resistant, Ozone-resistant, RoHS compliant
|
||||
Structure.
D1: Inner diameter of cold shrink tubing as supplied.
D2: Inner diameter of plastic core as supplied.
L: length after full shrink (nothing inside).
T: Thickness after full shrink (nothing inside).
|
Installation instructions.
Technical Datas.
Test item
|
Test Standard
|
Unit
|
Value
|
Dielectric Strength
|
GB/T 1695-2005
|
kV/mm
|
17.16
|
Waterproof Rate
|
ISO 20653:2013
|
------
|
IP68
|
Shore Hardness
|
GB/T 531.1-2008
|
Shore A
|
44
|
Tear Strength
|
GB/T 529-2008
|
kN/m
|
28
|
Tensile strength
|
ISO 37:2011
|
Mpa
|
9.31
|
Elongation at Break
|
ISO 37:2011
|
%
|
720
|
Light Ageing-UV Eposure
|
ASTM G154-12a Cycle 1
|
1000h exposure duration with Lamp type: UVA-340 / 8h UV at(60±3)℃ BPT, 0.89W/(m2.nm)@340nm / 4h
condensation at (50±3)℃ BPT |
|
Ozone Aging
|
ISO 7326:2006 Method 1
|
Pretreatment temperature: (23±2) ℃/ Pretreatment period: 48h/ Testing temperature: (40±2)℃ /Ozong concentration: (50±5)pphm.
|
Selection Table.
* If you need other size, please feel free let us know.
The next article
EPDM cold shrinkable tubing, similar to 3M 8428-6 8428-12 8428-18 8428-24